KRS-2350S HV Red Version

Open price　No.01221

●Replacement model of KRS-2350HV ●Suitable for striker conversion kit and other robot parts ●The maximum motion angle 180 degrees ●Torque29.5kg/cm ●Speed 0.13sec/60°※used with Ni-Cd 9 cell ●41×38×20（mm）●61.5g ●Adaptable voltage 9〜12V● Full option is equipped (whole metal gear, hard servo gear shaft, metal bushing case, heat sink case etc.)

KRS-4014S HV ICS Red Version (coreless motor 11.0V）

Open price　No.01190
6 pieces　Open price NO.01191

●The maximum motion angle 270 degrees ●Torque 40.8kg/cm ● Speed 0.19sec/60°※used with Ni-Cd 9 cell ●43×32×32.5mm ●65g●Adaptable voltage 9V〜12V ● Strengthen final gear ●Whole metal gear ●Correspondent control board RCB-1/3HV, motion processor HV★Accessories : connection cable G（400mm）

KRS-4024S HV ICS Red Version (11.0V）

Open price NO.01174
6 pieces　Open price NO.01175

●The maximum motion angle 260 degrees ●Torque 10.5kg/cm● Speed 0.17sec/60°※used with Ni-Cd 9 cell ●43×32×32.5 mm ●48.5g ●Adaptable voltage 9V〜12V ●Strengthened hybrid gear ●Correspondent control board RCB-1/3HV、motion processor HV★Accessories : connection cable G（400mm), Low heigh horn

KRS-4013HV ICS Red Version(coreless motor 11.0V）

Open price　No.01148
6 pieces　Open price NO.01149

●The maximum motion angle 270 degrees ●Torque 27.0kg/cm● Speed 0.12sec/60°※used with Ni-Cd 9 cell ●43×32×32.5 mm ●65g ●Adaptable voltage 9V〜12V● Strengthen final gear● Whole metal gear ●Correspondent control board RCB-1/3HV, motion processor HV★Accessories : connection cable G（400mm)

KRS-2350HV ICS Red Version

1 piece ¥16,275　No.01097
10 pieces　¥126,000 NO.01098

●Full option is equipped (whole metal gear, hard servo gear shaft, metal bushing case, heat sink case, heat sink case etc.) and correspondence to HV spec up ●ICS settings and instruction system exclusively for RED Version are possible ●62g ●41×38×20 mm ●Adaptable voltage : 9～12V ●Torque：29.5kg・cm　●Speed：0.13sec/60°※used with Ni-Cd 9 cell

KRS-788HV ICS Red Version

1 piece ¥5,775　No.01090
6 pieces　¥28,875 No.01091

Equivalent HV version of KRS-786 standard servo for KHR-1. Metals gears have been strengthened up ●47.5g ●41×35.×21（mm）●Adaptable voltage：9～12V ●Torque：10.0Kg/cm●Speed：0.14sec/60°※used with Ni-Cd 9 cell

RSS